Film Holder Modification

As low as $61.00
Film Holder Modification

Get set to shoot wet plate in your large format camera with these Scully/Osterman modifications.

Get set to shoot wet plate in your large format camera with these Scully/Osterman modifications.

Our standard modification option is the largest opening we can make in a sheet film holder for a particular format.  A standard mod is 1/2 inch smaller on each side than the original film sheet it was made to hold. For example: a standard modification of a 4x5 sheet film holder will accomodate tin or glass plates that are 3.5 x 4.5 inches. A 5x7 standard mod would hold plates 4.5 x 6.5 inches. And our 8 x 10 standard mod will hold 7.5 x 9.25 inch plates.

If you select  a custom dimension for an opening, it must be smaller than the standard opening for that particular film holder.

Corners are fitted with stainless steel wire to support the plate. The best results are obtained from film holders that have a solid aluminum septum that separates the two sides (such as Fidelity, Toyo, and Lisco). We are no longer modifying older film holders with wooden frames, or those made by Riteway and Sinar, as these cannot be modified cleanly.

Send your film holder to us at the address below and we'll make the modifications for you.

LundPhotographics 207 Chapel Rd., Waldoboro, ME 04572

Please note that we do not carry sheet film holders; we only perform the modification to sheet film holders sent to us. When mailing film holders, be sure to include your name, return address, and the plate size you intend to shoot with this holder.

Due to Covid concerns, all arriving packages are held for 1 week prior to opening. Please plan ahead for this additional delay.

If you'd like your film holder modified for a custom plate size or aspect ratio, contact us with your specifications

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Related Posts

Copyright © 2020 LundPhotographics, Inc. All rights reserved.